歡迎進入洛陽友建重工智能科技有限公司官方網站!
叉車 您的當前位置:首頁 > 產品中心 > 叉車

5噸越野叉車

更新時間:2020-08-10 11:15:43點擊次數:3168次
型號 Model Unit CPCD50
動力形式Power type 內燃 Diesel
額定起重量Rated capacity kg 5000
載荷中心距Load center d mm 600
標準起升高度Lift height h2 mm 6000
門架傾角(/)Mast tilt angle (forward/backward) α/β Deg 3月6日
軸距 Wheel-base L4 mm 2560
輪距(前/后)Tread(front/rear) b4/b5 mm 1760/1760
行車制動 Travel brake 液壓-踏板式Hydraulic-Foot pedal
停車制動 Parking brake 機械-手動式Mechanical-Hand level
起升速度(滿載/空載)Lift speed(with/without load) mm/s 350/400
下降速度(滿載/空載)Lower speed (with/without load) mm/s <380
行駛速度(滿載/空載)Travel speed (with/without load) km/h 20
最大爬坡(滿載)Max. gradeability (with load) % 28
發動機                   Engine 型號 Model YT4B2Z
額定功率 Rated power kw 74.9/2400
蓄電池                         Battery 電壓 Voltage V 12
容量 Capacity Ah 100
變速箱                        Gearbox 傳動形式Transmission type 液力 Hydraulic
檔位(前/后)Gears,speed (front/rear) /
輪胎                           Tire  類型    type 充氣胎    Pneumatic tyre
型號                      Model   Front 16/70-20-16PR
  Rear 16/70-20-16PR
自重Self.weight kg 8710
自由起升高度Free lift height h4 mm 100
貨叉Fork 厚度×寬度×長度 Thickness×Width×Length c×b×a mm 60×150×1220
外形尺寸
Overall dimensions
全長(不帶貨叉)Overall length(without forks) L2 mm 4460
全寬Overall width b1 mm 2165
全高
Overall height
門架升起時Extended height(mast) h1 mm 4300
門架未升起Lower height(mast) h3 mm 2550
護頂架Overhead guard h7 mm
最小轉彎半徑Min. turning radius Wa mm 5500
最小離地間隙
Min. under ground clearance
門架處 Under mast m1 mm
軸距中點處Center of wheel-base m2 mm 290
  • 上一篇:2噸叉車
  • 下一篇:已經沒有了
 
提交訂單  
欧美性爱一级免费黄片